Chinese semiconductor industry
- Thread starter Hendrik_2000
- Start date
- Status
China Micro Corporation (AMEC) Celebrates the Shipment Milestone of the 2000th CCP Etching Equipment Reactor
Recently, the 2000th reaction stage of the capacitively coupled high-energy plasma (CCP) etching equipment of China Micro Semiconductor Equipment (Shanghai) Co., Ltd. (hereinafter referred to as "China Micro Corporation", stock code: 688012) was successfully delivered to a leading domestic company. Semiconductor manufacturer , this is another important milestone for Zhongwei's CCP etching equipment and a key step towards a new goal. The CCP etching equipment reaction table shipped to the customer in this batch includes Primo AD-RIE® and Primo HD-RIE® series products, both of which are from the customer's repeat order.
The Primo AD-RIE-e shipped this time is a sub-product of Primo AD-RIE®, China Micro's second-generation dielectric etch product. Primo AD-RIE-e not only has the efficient design of Primo AD-RIE® switchable dual low-frequency RF sources and flexible installation of up to six reaction stages, but also is equipped with a self-developed four-zone dynamic electrostatic chuck. The temperature can be controlled independently to achieve higher etching uniformity and etching selectivity ratio . Customers value the equipment's stable and reliable performance in mass production, significantly improved productivity and relatively low production costs. Primo AD-RIE-e will be applied to the development and mass production of mask layer etching of 5nm and below in the front and middle stages, providing customers with innovative etching solutions.
In addition, this delivery lot of Primo HD-RIE® has a system of six single-stage chambers, positioned to provide a comprehensive solution for mid-to-high aspect ratio etching . Primo HD-RIE® has high synchronous pulsed RF power, is equipped with high power high temperature electrostatic tray and coolable focus ring process components, and has outstanding performance in gas pulse, multi-zone gas regulation, power-on temperature control, etc. Primo HD-RIE® excels in high aspect ratio trench and deep hole etching in 3D-NAND and DRAM, and has achieved mass production in some key processes.
Since the release of the first CCP etching equipment Primo D-RIE® in 2007, Zhongwei has continuously expanded the product line of CCP etching equipment to meet the increasingly stringent technical needs of customers. In addition to the Primo D-RIE® dual-stage etch equipment, the CCP etch equipment family includes the dual-stage etch equipment Primo AD-RIE®, the single-stage etch equipment Primo SSC AD-RIE®, and the Primo HD-RIE ® and Primo iDEA® for etching and debonding. These products provide customers with fully integrated equipment solutions for a variety of applications in processes from 65nm to 5nm and below. China Micro's etching equipment product line also includes two other inductively coupled low-energy plasma (ICP) etching equipment and through-silicon via (TSV) etching equipment.
The unique innovative technology and rapidly growing market share of China Micro's plasma etching equipment have consolidated its leading position in the semiconductor front-end equipment industry at home and abroad, and promoted the company's sustainable development. On the basis that the amount of new orders in 2021 increased by 90.46% to 4.129 billion yuan compared with the whole year of 2020, and the operating income increased by 36.72% to 3.108 billion yuan, the amount of new orders signed by the company in the first half of 2022 increased by 61.83% year-on-year to 3.057 billion yuan , the operating income increased by 47.30% year-on-year to 1.972 billion yuan, and the net profit after deducting non-return to the parent increased by 615.26% year-on-year to 441 million yuan, of which the etching equipment income was 1.299 billion yuan, an increase of about 51.48% over the same period last year.
Su Xingcai , Group Vice President and General Manager of Dielectric Etching Products Department of China Micro Corporation, said that China Micro Corporation always emphasizes innovation and differentiation in the process of product development, design and manufacturing, and through continuous technological innovation Provide customers with advanced product solutions. Just as the " Ten Principles of Product Development" in the corporate culture of China Micro 's "Four Tens ", we first emphasize "development to achieve the highest performance of the equipment and the strictest requirements of customers ", and always adhere to the "three complete" quality management model , which runs triple insurance throughout every link of the product life cycle. It is China Micro's innovative technology and world-class expertise that makes our etching equipment products favored by leading manufacturers, and we are proud to help our customers achieve their technical and profitability goals.
Bro maybe Huawei was designated the vanguard to fast track tech development? Private sector move fast especially when under threat.
My issue with these claims is that a company as sanctioned as them should be publicly announcing this to re assure customers that their hardware solution is viable - strange not to see that. In general a lot of claims in this forum but unlike the military threads there’s no visual or print evidence
they are the test mouse of domestic companies... chips, Nanflash, domestic screen.. they are the first to use...they are semi-state and private companies...
hello bro how's your day, I still can't get over your post on A-SET, please post more.
They did by proclaiming the Return of The King, My opinion they will announce once everything is in order , 2023 will be a blockbuster year for Huawei, IF the report and rumors of what we discuss here come true, it will surely shook the Americans...lol the symbolism it project since the US is more concern on their Image will be damaging, like an earthquake, The SMIC 7nm already unsettled them what more IF Huawei introduce a 5G KIRIN 7nm chip powering their smartphone.
Multizone independent heating control is the norm now for maximum temperature uniformity. Lam proposed a "pixel" heater but so far they are also at 4 zone control for mainstream equipment. So AMEC isn't behind at all.China Micro Corporation (AMEC) Celebrates the Shipment Milestone of the 2000th CCP Etching Equipment Reactor
Recently, the 2000th reaction stage of the capacitively coupled high-energy plasma (CCP) etching equipment of China Micro Semiconductor Equipment (Shanghai) Co., Ltd. (hereinafter referred to as "China Micro Corporation", stock code: 688012) was successfully delivered to a leading domestic company. Semiconductor manufacturer , this is another important milestone for Zhongwei's CCP etching equipment and a key step towards a new goal. The CCP etching equipment reaction table shipped to the customer in this batch includes Primo AD-RIE® and Primo HD-RIE® series products, both of which are from the customer's repeat order.
The Primo AD-RIE-e shipped this time is a sub-product of Primo AD-RIE®, China Micro's second-generation dielectric etch product. Primo AD-RIE-e not only has the efficient design of Primo AD-RIE® switchable dual low-frequency RF sources and flexible installation of up to six reaction stages, but also is equipped with a self-developed four-zone dynamic electrostatic chuck. The temperature can be controlled independently to achieve higher etching uniformity and etching selectivity ratio . Customers value the equipment's stable and reliable performance in mass production, significantly improved productivity and relatively low production costs. Primo AD-RIE-e will be applied to the development and mass production of mask layer etching of 5nm and below in the front and middle stages, providing customers with innovative etching solutions.
In addition, this delivery lot of Primo HD-RIE® has a system of six single-stage chambers, positioned to provide a comprehensive solution for mid-to-high aspect ratio etching . Primo HD-RIE® has high synchronous pulsed RF power, is equipped with high power high temperature electrostatic tray and coolable focus ring process components, and has outstanding performance in gas pulse, multi-zone gas regulation, power-on temperature control, etc. Primo HD-RIE® excels in high aspect ratio trench and deep hole etching in 3D-NAND and DRAM, and has achieved mass production in some key processes.
Since the release of the first CCP etching equipment Primo D-RIE® in 2007, Zhongwei has continuously expanded the product line of CCP etching equipment to meet the increasingly stringent technical needs of customers. In addition to the Primo D-RIE® dual-stage etch equipment, the CCP etch equipment family includes the dual-stage etch equipment Primo AD-RIE®, the single-stage etch equipment Primo SSC AD-RIE®, and the Primo HD-RIE ® and Primo iDEA® for etching and debonding. These products provide customers with fully integrated equipment solutions for a variety of applications in processes from 65nm to 5nm and below. China Micro's etching equipment product line also includes two other inductively coupled low-energy plasma (ICP) etching equipment and through-silicon via (TSV) etching equipment.
The unique innovative technology and rapidly growing market share of China Micro's plasma etching equipment have consolidated its leading position in the semiconductor front-end equipment industry at home and abroad, and promoted the company's sustainable development. On the basis that the amount of new orders in 2021 increased by 90.46% to 4.129 billion yuan compared with the whole year of 2020, and the operating income increased by 36.72% to 3.108 billion yuan, the amount of new orders signed by the company in the first half of 2022 increased by 61.83% year-on-year to 3.057 billion yuan , the operating income increased by 47.30% year-on-year to 1.972 billion yuan, and the net profit after deducting non-return to the parent increased by 615.26% year-on-year to 441 million yuan, of which the etching equipment income was 1.299 billion yuan, an increase of about 51.48% over the same period last year.
Su Xingcai , Group Vice President and General Manager of Dielectric Etching Products Department of China Micro Corporation, said that China Micro Corporation always emphasizes innovation and differentiation in the process of product development, design and manufacturing, and through continuous technological innovation Provide customers with advanced product solutions. Just as the " Ten Principles of Product Development" in the corporate culture of China Micro 's "Four Tens ", we first emphasize "development to achieve the highest performance of the equipment and the strictest requirements of customers ", and always adhere to the "three complete" quality management model , which runs triple insurance throughout every link of the product life cycle. It is China Micro's innovative technology and world-class expertise that makes our etching equipment products favored by leading manufacturers, and we are proud to help our customers achieve their technical and profitability goals.
they are forming their domestic semiconductor supply chain...5 months ago Huawei's rotating president say we will build 3 big projects in the future.... and he also announced Huawei has chip stacking technology.... Huawei buying a chip foundry in Ningbo to manufacture their auto chips and RF chips...well enough...hello bro how's your day, I still can't get over your post on A-SET, please post more.
Sir why didn't they bought SMEE? maybe the Corporate Culture is different so they decided to do it themselves? I have seen that Hubble investment are primary on Critical component like RSLaser and such and the rest are being subsidies by gov't, so there is a hidden State coordination and Huawei was given the task to identify those critical mass needed to ensure mass production.
Last edited:
Their ambition is to advance the domestic semiconductor supply chain....and de-america semiconductor parts components.
Last edited:
- Status