Bremen Class Frigate, Karlsruhe, F212, in 1/300 Scale German Type F122

Jeff Head

General
Registered Member

My Review and Build of Revell KIT #5143, Bremen Class,
1/300 SCALE F122 Frigate, Karlsruhe, F212 REVIEW & BUILD,


32915572721_8506bc8546_b.jpg

32659869650_e4dab62b89_b.jpg

32915572391_69631d86dc_b.jpg



German Type F122 Bremen Class Friagtes

A total of eight F122 Bremen-class frigates of the German Navy were commissioned between 1982 and 1990. These have been the main stay of German frigates for the last 30 years, and they were built to a similar design as the Dutch Kortenaer class but with a different hull and propulsion system. The ships were built primarily for anti-submarine warfare but are also suited for multi-role tasks of anti-aircraft warfare and anti-surface warfare.

This class of ship was one of the last to be constructed under post-war displacement limitations imposed by the west on West Germany after World War II. Just the same, they are capable frigates, handle well, and have seved very capably for 30 and more years.

The eight Bremen class frigates will are in the process of being replaced by the new, much larger, more stealthy, F125 Baden-Württemberg class frigates, of which the first two have already been launched.

The charateristics of these frigates are as follows:

Displacement: 3,680 tonnes (3,620 long tons)
Length: 130.50 m (428 ft 2 in)
Beam: 14.60 m (47 ft 11 in)
Draft: 6.30 m (20 ft 8 in)
Propulsion: 2 × propeller shafts, controllable pitch, five-bladed Sulzer-Escher propellers, later replaced with seven-bladed
CODOG (Combined diesel or gas)
- 2 × MTU 20V956 TB92 diesel engines, 8.14 MW (10,920 hp) total
- 2 × General Electric LM2500 gas turbines, 38 MW (51,000 hp) total
- 2 × Renk STG 150-50 gearboxes, 10:1 (diesel) and 720:47 (turbine)
- 4 × Deutz MWM diesel-generators, 750 kW (1,010 hp)
Speed: 30 knots (56 km/h)
Range: more than 4,000 nmi (7,400 km) at 18 knots (33 km/h)
Complement: 202 crew plus 20 aviation
Sensors and processing systems:
1 × EADS TRS-3D air search radar (three-dimensional)
1 × WM 25 combined surface search and fire control radar I/J band
1 × Thales Nederland STIR 180 fire-control radar I/J/K band
1 × Kelvin Hughes Nucleus 5000 I band navigation radar
1 × STN Atlas DSQS-23BZ hull-mounted sonar
Electronic warfare & decoys:
ESM/ECM EADS FL 1800S
2 × SCLAR decoys
SLQ-25 Nixie torpedo decoy
Armament:
Naval guns:
1 × OTO-Melara 76 mm dual-purpose gun
2 × Mauser MLG27 27 mm autocannons
Antiaircraft warfare:
1 × 8-cell launch system, 16 × Sea Sparrow surface to air missiles
CIWS:
2 × MK 49 launcher, 21 × RAM each
Anti-ship missiles:
2 × quadruple Harpoon anti-ship missile launchers
Antisubmarine warfare:
2 × Mark 32 324-mm twin torpedo launchers, 8 × DM4A1 or Mark 46 torpedo
Aircraft carried:
2 Sea Lynx Mk.88A helicopters equipped with torpedoes, air-to-surface missiles Sea Skua, and/or heavy machine gun.

Some of the major design goals in building these vessels in the 1990s were, reduced radar, infrared and acoustic signatures (stealth technology), something that was new to the German Navy but has since been even more enhanced successively with the Type 123 Brandenburg-class frigate, the Type F124 Sachsen-class frigate, and now most notably with the new Type F125 Baden-Württemberg-class frigates.

Other important requirements in the 1980s, for frigates designed for the cold war, were to escort convoys for reinforcement and resupply of Allied forces in Europe. They frequently took part in NATO Standing Naval Forces. Since 1990, all ships have served in additional supporting missions such as the embargo operations against former Yugoslavia in the Adriatic Sea or Operation Enduring Freedom against the international terrorism.

During their lifetime, the ships' equipment has frequently been modernized and a further adaptation of combat systems is foreseen in the near future.



The Karlsruhe, F212

The Karlsruhe is the sixt of the class of eight Breen Class F122 frigates. She was laid down March 10, 1981, launched on January 8, 1982, and commission on April 19, 1984. She has been in active service for 33 years now.

For a period of time, Karlsruhe wa fitted with an addition Close-in-Weapon-System (CIWS) which was a 30mm Goal keeper 30mm gatlin gun for shooting down missile or other air threats. But the two RAM (Rolling air-frame missile) launchers were deamed more effective, and these two have been, with their 21 missiles each (412 missiles together) aboard all of the Bremen class since the mid-1980s.

During the Cold War period, up until 1990 or 1991, the ships' main war task was to escort convoys for reinforcement and resupply of Allied forces in Europe in case of war with the Soviet Union.

Once the Soviet Union fell and wnt bankrupt, the frigates have also taken on duties of crisis management with various caris cinluding Yugoslavia, Serbia, Lybia, the Mid-East with Iraq and Syria, and other such duties. These vessels, including the Karlsruhe, frequently take part in NATO Standing Naval Forces.

In fact, in 2016, the Karlsruhe was named the flagship of Standing NATO Maritime Group 2 (SNMG2) patrolling the Aegean Sea.

Since 1990, all ships have served in additional supporting missions such as the embargo operations against former Yugoslavia in the Adriatic Sea or Operation Enduring Freedom against the international terrorism.

The Karlsruhe has also successfully assisted in pirating operation in the Gulf of Aden. On December 25, 2008, she actively particpated asssiting an Egyptian freighter repel pirates on that date in the Gulf of Aden.

During her lifetime, as with all of the Bremen class, Karlsruhe, has frequently been modernized and with further adaptations of combat systems.

Karlsrruhe is one of only three Bremen class left in active service. It expected that she or one of her sisters will be decommissioned with the launch and trails of he next F125 frigate.


Introduction and What's in the Box - February 18, 2016

This Revell kit is from the GErman Operation group for revell. It is molded to scael 1/300. Although the most common scale is 1/350, revell models several ships in 1/35, and this is the only known injected molded plastic model of the F122, Bremen lass known.

The model is well done with numrous sprues of parts.

There is no "water-line" option and the hull comes in to pieces, port and starboard halves.

The kit includes all of the railing, but it is bulky plastic moled railing and larger than the actual raiing would be. I have a significant amount of 1/350 scale photo etch metal railing and will use it for this kit instead of what comes with the model.

Another short coming is the weapon systems. The Sea Sparrow Luancher, the RAM launchers, and the Harpoon missile launchers are all extremely simplistic with very little detail.

I have some Veteran model RAM launchers and ome very nice Harpoon quad launchers from other model kits, and also have Sea Sparrow missile covers for the octuple launcher to add realism to those parts...all of which I will use in this model.

There is also quite a bit of flash that needs to be removed from the model parts as you remove them from the sprues.

All of that said, themodel is a decent depiction of the class, and includes decals for any of the class. THis was a nice feature as I specificaly wanted to build the KArlsruhe.

Back in the mid-1970s I spent two years in Germany serving a mission for my church. During my time there I lived 10 months in Karlsruhe and really liked the there on the Rhine and the French border. So I wanted specifically to build the LArlsruhe since I feel a kinship to that city and a number of good people I met and befriended there.

The instructions are very nice in a 16 page full color booklet, with full color illustrations of the painting scheme.

I believe with the additional parts I am using and the photo etch parts, that this model will turn out ery well.

Here's how the model looks from the box, with the instructions:


32659869540_8c83d74619_b.jpg

32915571911_7d0cc7e6ae_b.jpg

 

Jeff Head

General
Registered Member

The Build - Hull, props and rudder, hangar, painting the hull - February 19, 2017

I started the model by building the hull, and then adding the props and rudder:


32659868810_b8e0cbd74f_b.jpg

32915569311_45e74b40fc_b.jpg

32659868610_31ed84dc56_b.jpg

32915568851_23fc84a14b_b.jpg

 

Jeff Head

General
Registered Member
I then added the hangar to the after portion of the ship, and then painted the lower hull red and the waterline mark black:

Here's how that went:


32659868430_9d511a3f03_b.jpg

32915568141_f4aff1cb34_b.jpg

32659868260_85ffbc5780_b.jpg

32915567411_f3990c2274_b.jpg

32226804033_31ca58edc0_b.jpg

 

Jeff Head

General
Registered Member

32915567111_7468b09c67_b.jpg

32659868110_31c73a58d7_b.jpg

32915566921_9101634a18_b.jpg

32659867960_a7e4f6a47a_b.jpg


Looking good.

In the next session I will begin adding the smoke stack and its deck house, the bridge, the masts and the weapons systems.
....pictures so far. I will add the descriptions later:
 

Jeff Head

General
Registered Member

The Build - Adding the two main deck houses, the main weapons, and the helicopters - February 20, 2017

At this point it was time to build the two main deck houses.

Aft is the smoke stack and its deck hose and forward of that the main deck house including the bridge, , you have the bridge and first smoke stack combined into on. This holds the forward CIWS, the bridge and AEGIS Phased Array Radars (PARs), and ultimtely the main mast and then the smoke stack behind that.

Here's how they look once built and attached to the vessel. I added the decals for the landing pad at this time too:


32915566521_2da44c85f8_b.jpg

32659867850_23cb4c2397_b.jpg

32226803393_a73f68542d_b.jpg

32659867800_1655bf28cb_b.jpg

32226803043_470d18f95a_b.jpg

 

Jeff Head

General
Registered Member
At this point I added the masts and sensors, and then the main weapons. This included the 76mm inch gun forward, the Mk-29 Evolved Sea sparrow launcher forward, the quadruple Harpoon launchers amid ships, and the RAM launchers on top of the aft portion of the helicopter hangar.

Here's how that looked:


32659867720_79ceeacb27_b.jpg


32915564901_0b377c4baa_b.jpg

32226802293_8bb26d759a_b.jpg

32915564541_a65f701e1e_b.jpg

 

Jeff Head

General
Registered Member
I then built, painted, added the decal to, and then placed the Lynx helicopters on the vessel. I had done some detail work on the enterior of the hanger deck...it cam just plain and we needed some auxillary decks fro maintenance and the railing and water tight doors to access them and the main level of the hanger.

It turned out pretty nicely:


32226802053_19e6ac5cbf_b.jpg

32915563931_410157e908_b.jpg

32226801343_441a9a3267_b.jpg

32915562351_77785347cb_b.jpg


That is looking very good now. In the next session I will ad a lot of details to the entire vessel, along with the railings, ladders/stairs, and other photo etch equipment...and also add the decals, do the touch up, and complete the model.
 

Jeff Head

General
Registered Member

The Build - , Details, Photo Etch, decals, touch up and complete - February 21, 2017

In this session I added a number of details, added the photo etch metal parts and then the decals.

Quite a bit of work...but I had the entire day to work on it and it turned out nicels.

Here's how that went...and these photo etch railings look far superior to the plastic, very thick and bulky railings that came with the model.

Lots of stuff and pictures from this session:


32226801013_b02d31cb79_b.jpg

32915561541_ee8c3ff2e8_b.jpg

32226800613_1721ecbaa4_b.jpg

32915561221_5e2b97efb8_b.jpg

32226800523_3849ab12f8_b.jpg

 
Top